2026 DOEPKER 49,9 t Sliding

2026

DOEPKER

2DERTSN3XT4048706

Novo

DOEPKER 55T TRIDEM (RT) *DESCRIPTION: EQUIPMENT - RECOVERY TRAILER - SLIDING AXLE TILT -STANDARD FEATURES- *PROTECTIVE FEATURES* -MUD FLAP IN FRONT OF HYDRAULIC CONTROL VALVE -1 PAIR OF MUD FLAPS BEHIND REAR WHEELS -REAR IMPACT GUARD MEETS CMVSS 223 SPECIFICATIONS *GENERAL* -TARE WEIGHT: APPROX. 10,078 KG (22,220 LBS) INCLUDING STANDARD EQUIPMENT -G.V.W.R.: 65,000 KG (140,000 LBS) -DISTRIBUTED LOAD: 55 TON OVER COMPLETE LOWER DECK -CONCENTRATED LOAD (LOWER DECK): 40 TON OVER 15’, 35 TON OVER 10’ -LOWER DECK AT 42’ 10 1/2”, UPPER DECK AT 10’ 1/2” -KNIFE EDGE TAIL -7 DEGREE LOADING ANGLE, 13 DEGREE MAX TILT ANGLE BASED ON 8’6” WIDE MODEL; 60” SPREAD ON 245/70R17.5 TIRES -1/2” UPPER COUPLER -50” UPPER COUPLER ON 245/70R17.5 TIRES -HINGE DOWN UPPER COUPLER PLATE OPERATED WITH AIR OPERATED LOCK PIN -LIVE ROLL AT REAR OF GOOSENECK AND AT FRONT OF MAIN DECK -CROSS MEMBERS ON 12” CENTERS -WET KIT READY HYDRAULIC SYSTEM; 30 GALLON RESERVOIR REQUIRED; 25 GALLON / MINUTE PUMP; 2500 PSI (3,000 PSI MAX CAPACITY) -MAIN DECK TO BE HUDRAULIC TILT, SPECIAL DESIGN SLIDING SUSPENSION FRAME TO ELIMINATE SIDE TO SIDE SUSPENSION MOVEMENT WHILE TRAVELING AND UPGRADED TO SLIDE ON UHMW WEAR PADS TO PREVENT DEBRIS FROM ENTERING SYSTEM WHILE PREVENTING PREMATURE RAIL WEAR AND PROMOTING SLIDE FUNCTION RELIABILITY -SECURED CABLE DESIGNED TRACKING SYSTEM FOR AIR AND ELECTRICAL -HEAVY DUTY 6” BORE x 3” ROD x 190” STROKE CYLINDER DESIGNED TO BE FULLY CLOSED WHEN TRAILER IN TRANSPORT POSITION -HYDRAULIC VALVE BANK HANDLES WORK IN AN UP/DOWN MOTION LOCATED ON D/S LOWER GOOSENECK SECTION -TAIL CHAIN SLOTS LOCATED WITHIN TOP OF OUTER FLANGE (D/S AND C/S) ALONG LOWER AND UPPER DECK (18 PER SIDE LOWER DECK; 4 PER SIDE UPPER DECK) -3 REAR CHAIN SECUREMENT LUGS ACROSS BACK OF LOWER DECK AND 2 LOCATED ACROSS FRONT OF LOWER DECK -4 PAIR OF 1 5/8” INNER PIN POCKETS LOCATED ON LOWER DECK ALONG OUTER RAIL -REFLECTIVE TAPE -CANADA/U.S. SERIAL PLATE -SAFETY CERTIFIED *PAINT & FINISH* -FULLY STEEL SHOT BLASTED -PURE ZINC COATING APPLIED TO COMPLETE STEEL OUTSIDE -ZINC RICHED PPG TX7 SERIES EPOXY PRIMER INSIDE AND OUT -PPG TOPCOAT (ONE COLOR) -ENTIRE TRAILER PLACED IN TEMPERATURE CONTROLLED HEATED OVEN TO CURE PAINT TO MEET DOEPKER SPECIFIC HARDNESS AND ADHESION CRITERIA *LIGHTING* -LED LIGHTS AS PER CMVSS -SIDE SIGNAL LIGHTS -RED REAR SIGNAL -2 OVAL AMBER STROBE LIGHTS FACING REAR C/W SWITCH IN AIR GAUGE BOX *SUSPENSION* -RIDEWELL RAR240 UNDERSLUG; 25,000 LB AIR RIDE -25,000 LBS AXLES -CAM TUBE ENCLOSURES -DUST SHIELDS WHERE AVAILABLE (NOT REQUIRED ON WABCO DISC BRAKES) -INLINE FILTERS ON AIR LINES -AIR RIDE C/W DUMP VALVES AND PRESSURE GAUGE MOUNTED IN ALUMINUM BOX MOUNTED D/S IN FRONT OF FRONT AXLE -CHAIN AXLE SLINGS -WHEELBASE: 38FT 6IN ​DOEPKER 55T TRIDEM (RT)​

49,9 t

Sim

Passeio aéreo

Tri

Deslizando

63.502,93 kilos

Sim

16,15 m