2026 ALDURA 23848,09 L

2026

ALDURA

Novo

150BBL VACUUM

NEW ALDURA 150BBL ALUMINUM VACUUM TRAILER NON-CODE Capacity: 6,300 gal. + 1% Expansion Commodity: Transportation of oilfield fluids such as water, mud, oil field waste. Pressure: Tested at 23 PSI Relief Settings: 22 IN HG External, 17 PSIG Internal Overall Length: 42 ft. 2 in. Height: 10 ft. 9 in. Weight: 10,260 Lbs. Width: 102 in Material: Aluminum 5454H-32 Suspension: (2) Air suspension of 30,000 lbs capacity Baffles: Three (3) of 1/4 in. thk dish shaped Bulkheads: 3/8" Aluminum 5454H Non-code ASME Shape Compartments: Single Overturn Protection: Three (3), at front, middle and back of tank Shell: 1/4" aluminum shell 5454H-32 Rings: Twelve (12) rolled of 4"x2" C-channel profile Welding: Inside and out, minimal tie-ins with mig welding Connections: 3 in. vacuum female camlock fitting on middle top front bulkhead Outlet: Two (2) 4 in. butterfly valves at rear with 4" male fittings with cap Shut Off: Ball type primary in front manway and ball type secondary 12 Gal. on driver's side front with drain Venting/Reliefs: 1-1/2 in. vacuum relief, 2 in. pressure relief, both located at the top front of barrel, 2 in. blow down line at rear Axles: Two (2) 30,000 lbs. each, 120 in. wide, 71.5” track, 15” Ride height, weld-on hangers, ferrous hub, cast drum, ABS. Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M Bendix anti-lock brake system Bumper: 4 in. X 6 in. tube per DOT Sub-frame: High Strength Steel painted in aluminum color Landing Gear: One (1) AMPRO28-JT Tires: Eight (8) 11 X 24.5 R, Cut and chip Wheels: Eight (8) All-Aluminum 24.5" Upper Coupler: Bolt on adjustable 3/8" high strenght steel plate with 5/8" bolts. Access Ladder: One (1) safety driver side access ladder Manways: Three (3) on top of the tank, and one (1) on the rear bulkhead. All of 20 in. aluminum domed style with plates swing bolts and wing nuts Walkway: Driver side, with handrails, middle ladder, toe kicks, thru tread anti-slip walkway from the front to the top rear manway. External Coating: Hempel two coats of polyurethane on an epoxy primer (4-6 mils DFT) Internal Liner: Hempel 10-15 mil DFT epoxy liner Paint Prep: All steel surfaces sandblasted Conspicuity tape: 3M Per DOT Hose Tray: 3/16"x 25ft formed hose tray with 1/4 in. supports on both sides Fenders: Two (2) aluminum front fenders with mudflaps Lights: Sealed harness with Optronics GloLights LED per DOT. Two rear work lights with integrated switch. Mud Flaps: Four (4) anti-sail, front and rear Tool Box: One (1) on driver's side (30 in. X 18 in. X 18 in.) with sealed and key-lock door Vacuum Manometer: One (1) located in the rear Pump Platform: One (1) Platform to install a pump on the front driver's side of the tank Fluid level: One (1) Tube Glass Sight level on the rear bulkhead with two ball valves

23.848,09 L

1

Alumínio

Passeio aéreo

11 X 24.5 R, Cut and chip

Alumínio

Seguinte

Fixo

12,8 m

259,08 centimetros